Joost's Templates for Controller Mappings

Traktor DJ Joost from the Netherlands created some templates that will help you to document your Traktor controller mappings. All templates are in fact PDF forms where you can easily add the command/action that you mapped to a control.

To date the 36 mapping templates have been downloaded 195990 times.

Tips for using the templates
Leave a comment/Ask a question
Read related thread on DJ TechTools

Mac Keyboard, Mac-Tastatur Download template	PC Keyboard, PC-Tastatur Download template
Akai, APC 20 Download template	Akai, APC 40 Download template
Akai, LPD 8 Download template	Akai, MPD 24 Download template
Akai, MPD 32 Download template	Allen & Heath, Xone:1D Download template
Allen & Heath, Xone:4D Download template	American Audio, VMS 4/VMS Traktor/VMS 4.1 Download template
Denon, DN-MC 6000 Download template	Denon, DN-SC 2000 Download template
DJ Techtools, MidiFighter Download template	Faderfox, DX 2 Download template
Korg, nanoKONTROL 2 Download template	Korg, nanoPAD 2 Download template
Korg, padKONTROL Download template	Korg, Zero 8 Download template
M-Audio, Torq Xponent Download template	M-Audio, Trigger Finger Download template
M-Audio, X-Session Pro Download template	Native Instruments, Kontrol S4 Download template
Native Instruments, Kontrol X1 Download template	Native Instruments, Maschine Download template
Novation, 25 SL MkII Download template	Novation, Launchpad Download template
Novation, Nocturn Download template	Novation, ZeRO SL MkII Download template
Numark, Mixtrack/Mixtrack Pro Download template	Numark, Omni Control Download template
Reloop, Contour Download template	Reloop, Digital Jockey 2 Controller Edition Download template
Reloop, Digital Jockey 2 Interface Edition Download template	Stanton, SCS.3d Download template
Stanton, SCS.3m Download template	Vestax, VCI-100 Download template

Tips for using the Mapping Templates

IMPORTANT Before you start using the templates make sure that the latest version of Adobe Reader is installed. The following tips are based on Adobe Reader X.

Adobe Reader X

Open the PDF file with Adobe Reader and perform the following steps to get the most out of the templates:

Make sure that Highlight fields is activated. This can be done by clicking the button in the purple bar above the image. This will highlight all the fields where text can be entered.
Click the Comment button in the toolbar. Adobe Reader opens the Annotations and Markup panel.
Use the buttons in section Annotations to add various elements to your mapping form.
Use the Sticky Note icon to add a yellow shortcut with a text box attached. Add additional information here and then minimize it. A window with the added info will pop up whenever you hover your mouse above the shortcut.
Use the buttons in section Drawing Markups to add various shapes, text boxes and lines to your mapping for further information or use them for titles.

Have fun!

99 Comments

Chris Jennings wrote on April 4, 2011 at 14:37 Thank you for doing all this work.

proben wrote on April 5, 2011 at 00:10 great idea, thanks for doing this!! If you're taking requests, how about the Trigger Finger, the X-Sessions Pro, or the VCI-100SE?

proben wrote on April 5, 2011 at 00:33 great idea, thanks for doing this!! If you're taking requests, how about the Trigger Finger, the X-Sessions Pro, or the VCI-100SE?

proben wrote on April 5, 2011 at 00:33 oops sorry for the double post D'oh!

letdown wrote on April 11, 2011 at 22:00 Request: XONE 4D
	Rainer G. Haselier (admin) says: online

Joost (templates creator) wrote on April 12, 2011 at 12:27 both will be up asap. Come back soon!

John Doe wrote on April 12, 2011 at 19:38 Great stuf, but sad that there is no "Reloop Digital Jockey 2 Interface Edition" Template

Joost (templates creator) wrote on April 12, 2011 at 21:04 good idea, I will upload some reloop products tomorrow. contour, digital jockey 2 and 3. something like that.

bass wrote on April 13, 2011 at 17:58 I would be very grateful for Korg padKontrol template. Thank you in advance.

maverick wrote on April 14, 2011 at 14:30 request templates for m-audio torq xponent.thnks!

fede wrote on April 14, 2011 at 19:55 hi tanks for the works :D i need setting for stanton scs 3d and templete for da router tanks a lot for the help

Kommune Hinterweg wrote on April 15, 2011 at 08:30 Request: Faderfox DX 2 Tolle Arbeit !!! Respect!!!

Joost (templates creator) wrote on April 15, 2011 at 14:02 Torq xponent, faderfox DX2 and stanton SCS 3m and 3d will be up soon

conspired wrote on April 16, 2011 at 14:52 Thank you in advance for creating these mapping templates. Very helpful and efficient. Request: Mapping templates for the first versions of the NanoKontrol and NanoPad

djsaja wrote on April 16, 2011 at 20:46 Hallo. I look for mapping Traktor pro 2 hercules console rmx.... thx

Sascha Bürk wrote on April 17, 2011 at 00:17 Great Stuff! Request: Mapping templates for the first versions of the NanoKontrol and NanoPad, Numark Total Control, Novation Dicer

Joost (templates creator) wrote on April 18, 2011 at 17:24 I will make your requests in a few days. I'm out of the country for a few days. Be patient!

Phil wrote on April 18, 2011 at 17:26 Very useful! Thanks. A template for an Akai MPD 32 (good for mapping to the sample decks) would be great.

the.g.hsg wrote on April 18, 2011 at 23:19 one for VSM4?

btb wrote on April 20, 2011 at 23:19 yeah......one for the vms4 would be much appreciated...

MOOP wrote on April 23, 2011 at 07:09 These rock! I could really use one for Korg Zero 8 PLEEEEEEEEEEEEEEZ!!

DJ FAK wrote on April 26, 2011 at 01:10 HEY MAN HOW ABOUT MIXMEISTER CONTROLLER

DJ Papi wrote on April 30, 2011 at 15:09 Hi there... do you have a keyboard template for PC / Windows for Traktor 2? I use a Sony Vaio and not MAC. Would really appreciate this... Thank you and God Bless...

Leo Nogueira wrote on May 2, 2011 at 17:26 Request: Numark Omni Control for Traktor Pro 2 Thanks !!

DJ eDJe wrote on May 3, 2011 at 03:02 VMS4 please

Joost (templates creator) wrote on May 4, 2011 at 00:51 I'm sorry for not posting your requests. I got myself some new equipment and have been busy mapping it. I promiss I'll make them as soon as I can. my apologies

djjskill wrote on May 4, 2011 at 17:53 hi i use the S4 are there any template for mac/windows laptop

tomek wrote on May 5, 2011 at 23:18 PLEASE Someone upload a good mappings for Reloop Digital Jockey 1 IE

Believe_in_This wrote on May 6, 2011 at 01:46 NEED HELP! Please, Can someone give me support to Map my VESTAX VCI-300!! The Controler is not built to use it with Traktor and will not supported from Native or Vestax! It will mean i need support from everywhere... CAN YOU HELP ME??? send a mail to: long_short@gmx.de THX!!

Timal wrote on May 8, 2011 at 20:12 Bonjour a tous, voila j'ai acheté un dn mc 6000 et s'il vous plait aide moi car j'arrive pas a le mappé avec traktor pro. Merci

Joost (templates creator) wrote on May 9, 2011 at 11:52 Made korg Zero 8, omni control and vms4 should be up here soon!

kiddala wrote on May 12, 2011 at 22:42 many thanks for setting up this space, have already found an x1 map i'd like to use. The mapping i'd be interested in is ndx800 for TP2, to control upto 4 decks. love and peas x

kkk wrote on May 16, 2011 at 14:33 mpd32 wanted :)

vsti wrote on May 17, 2011 at 00:40 Request: keyboard for PC and BCD3000 templates please. Easier way to represent my mappings in full. bless

TechnoSzene Graz wrote on May 30, 2011 at 19:51 Hallo ich wollte mal fragen bzgl eines Mappings für den Djm 2000 vielen dank

Dan Dunkle wrote on June 6, 2011 at 06:06 Joost: Thanks for establishing this valuable site! I have developed some new and improved templates, for an extended keyboard and the Kontrol S4. If you would like to add them, you can contact me, or else download my mappings at http://www.traktorbible.com/freaks/mappingview.aspx?id=192 and strip out the form entries from the visual mapping guides. Regards, Dan

Thorsten D. wrote on June 16, 2011 at 13:41 Hi, ich suche noch ein TSI-File für einen Denon HC5000 Ich möchte für Deck A+B ein HC-4500 und für Deck C+D ein HC5000 verwenden!

Rance wrote on June 21, 2011 at 00:57 is it really the truth that no one writes about omnitronic...im searching so hard for a tsi... meant..have a TMC-02 from omnitronic and need a tsi for traktor pro???

djames wrote on June 21, 2011 at 02:58 Hi dude u are doin great work if u know of any akai mpk25maps that work let me knoe btw u should star charging even a small fee for your hard work u deserve it!!!!

David Dell wrote on June 29, 2011 at 22:52 Joost - I got all excited when I saw the Feena FMDJ9303 controller smack dab in the center of the photo that linked to this page. No sign of the Feena in here, though. Any chance you'll do a template for the Feena as well?

DjBuca wrote on July 2, 2011 at 06:14 Thank you for the great templates. Any thought of doing one for the Axiom 25?

gerry wrote on July 9, 2011 at 23:56 hello any mapping for a 4 decks hercules dj control steel for a traktor scratch pro V.1.2.1 thank you

goez wrote on July 11, 2011 at 22:58 is there any template and tsi for TSP2 of numark nuvj

Catfish wrote on July 28, 2011 at 19:49 Hi can you do a template for the Numark Mixtratck Pro

Janessa wrote on July 31, 2011 at 14:33 Holy shzniit, this is so cool thank you.

tom wrote on August 10, 2011 at 22:17 has anyone mapping for traktor pro version 1.2.1 for the VMS4 device?

djproben wrote on August 17, 2011 at 09:25 Any chance of an Ecler Evo 5 template some time?

vsti wrote on August 19, 2011 at 00:00 My advanced mapping for BCD300 has been downloaded more then 1000 times for three months now and would be nice if you can do template for it so peple can easier get to know all control assignments for determined modifires. Thanks for PC keyboard tamplate Joost, now I just need this BCD3000 template to fully explain my mapping. Thanks ;-)

TechMo wrote on October 5, 2011 at 07:57 Tag leute habn problem kann mir einer sagen wie ich beim AA VMS4 wenn ich Loop in/out hab die LED zum leuchten bring wenn ein Loop aktiv ist. Sonst ja alles kein Problem, nur bei den Loops klappts nicht. Muss man da vielleicht die Conditions (is in Loop Deck ?)ändern und wenn ja wie?

TechMo wrote on October 5, 2011 at 08:01 Ok in english again can anyone tell me how i config the Loop Leds on my VMS4. They have to blink or shine when a Loop is active. Is there a problem in my conditions setting (is In Loop Deck?. I play on 4Decks so i have 2Modifiers.

Catman4 wrote on October 16, 2011 at 18:05 Mapping for Numark Mixtrack? Thank you in advance

Vanderbit wrote on October 18, 2011 at 21:02 HI anyone have a Virtual DJ 6 pro mapping in Audio 8? need some help on this since i am a newbie and i wanna try how to mix music videos using VDJ and Audio 8 as soundcard. thanks guys!

clocksmurf wrote on October 18, 2011 at 21:32 A mapping for Numark MixTrack, would be very nice. then i could complete my new mapping, Thanx in advance----- greetings from Denmark somewhere,in the Baltic Sea 8)

Steve wrote on October 23, 2011 at 12:28 Please can any one help.I have an EKS Otus i need help How to work my mapping and are there any templates I can download.

Steve wrote on October 23, 2011 at 12:30 Please can any one help.I have an EKS Otus i need help How to work my mapping and are there any templates I can download for taktor Pro 1.2

vsti wrote on October 30, 2011 at 13:09 Behringer BCD 3000 template please.

george wrote on November 7, 2011 at 04:57 please help me out i need a template for the vestax spin

Matt wrote on November 15, 2011 at 14:36 Hi, I have a mixtrack Pro and Traktor Scratch Pro 2 - i want to use all 4 decks to play/cue/loop, change loop size and fillters/effects/EQ - obviously i can use the controler for most of this on deck A+B but i want ot remap the EQ cuts and Effects controlers to work with the fillters for A+B. Am also thinking of getting an X1 to control deck B+C fillters/effects/loops/play/cue etc. Can anyone help me with this remapping and is it a good idea to get an X1 for controlling B+C?

emdee wrote on November 16, 2011 at 12:52 request: numark total control for traktor 2

barry wrote on December 7, 2011 at 19:20 he joost ik zag dat je in april een template voor de hercules rmx zou maken maar ik zie em helaas niet enige kans dat hij nog gaat komen of alvast bedankt voor je reactie

myk wrote on December 28, 2011 at 09:00 how about a mapping for axiom 61 anywhere/ I have searched with no luck for a mapping? Thanks!!!

ForcedHand wrote on January 14, 2012 at 07:01 I see you're missing the Novation Twitch mapping for Traktor Pro 2. It's available from the manufacturer's website here: http://www.novationmusic.com/support/traktor_mapping_for_twitch/ I find it a big let-down that; mapping is NOT very intuitive, mapping (for Non-Native Instruments controllers) is rather difficult due to the small window, it has a total lack of assistance when attempting to map/ no helper application (like those used in the S4, X1 etc.) AND changes are destructive.

andy wrote on January 15, 2012 at 06:52 can somebody teach me how to use icon idj into traktor? plz give me step by step guide!

Dj Aprophis wrote on January 21, 2012 at 18:52 I'm looking for a Mapping for the brand New Numark N4. Can you help me please? (I'm German, my english is not God, sorry :-))

Dj Aprophis wrote on January 21, 2012 at 18:59 Kann mir jemand helfen, ein Mapping für den Brand neuen Numark N4 zu erstellen? Dort wurde nur VDJLE und SDI mitgeliefert was ich nicht so toll finde. :-( Von Numark gibt es zwar schon eine tsi aber die ist ein schlechter versuch von Numark ein Mapping für den N4, für Traktor 2Pro bereit zustellen. Wie kann ich ein Output so Mappen, das z.B. die Play/Pause Taste Blinkt sobald ein Titel in das entsprechende Deck geladen wurde und dauerhaft leuchtet, wenn das Deck gestartet wird????

patrick de vries wrote on January 22, 2012 at 00:59 Í am looking for the mapping foor geminin ctrl one, dap ds-150 omnitronic tmc 2 Can anyone help me

JH90 wrote on January 22, 2012 at 16:35 Great mappings man. Im trying to take my mixing to the next level and have a korg microkontrol, is there a midi mapping for this....?

Brad wrote on January 23, 2012 at 03:32 Great work! Any chance of getting the Versadeck template? How about Versadeck mapping for LED's and controls? Template is a good place to start though. Thanks, and keep up the good work!!

Stephen wrote on January 30, 2012 at 13:59 Behringer BCD 2000 / 3000 Thanks in advance.

HGN wrote on February 11, 2012 at 19:32 Fantastic works!!!!! I uses Kontakt and have the Korg nanoKontrol which is not one of controllers in the list of templates, I still find this publication extremely helpful to many users of MIDI controllers. Bravo!

joel wrote on February 13, 2012 at 14:52 please help me how can i use my traktor x1 to my vestax vci300??? email me.. joel.carreon@rocketmail.com

PETER wrote on March 10, 2012 at 09:46 Hi I recently purchased a Gemini Cntrl 7 - are Traktor Pro mapping available> please let know if any-one has that kind of info. Thank - You Peter

sososo93 wrote on March 11, 2012 at 20:37 make a template for numark N4 plz with hotcues button?

NOBILEE wrote on March 12, 2012 at 21:29 dl you have the mapping for HERCULES dj console rmx THANKS

jose Rendon A.K.A. Gelido wrote on March 20, 2012 at 23:59 Thank you very much for this templates, they are great, Fantastic Idea man!!! Thanks! :-)

DJTrancid wrote on May 7, 2012 at 21:28 Hello, I want to map the scratch function for a 2 channel midi-controller. But so far it doesn"t work. It seems that the jogwheel doesn't have a touchfunction. But when I do move the jogwheel and thouch it I get different midi-codes. Now there is also a button to put the controller in the scratch mode. How do I map this function. Please help me. Please mail to djtrancid@gmail.com and duijckers@hotmail.com

Pridders wrote on May 20, 2012 at 21:58 Any chance of a template for the Novation Twitch please

Andrew Harris wrote on May 30, 2012 at 05:14 I noticed there is no Mixtrack Pro template so I created one myself. I'm happy for it to be placed on this website but in the meantime it's available on my own site. http://www.blindcreek.com.au/djing/mixtrack-pro-template/

Marcel wrote on June 5, 2012 at 15:03 Hi! is it possible to put up a setting for the Mc CryptME-100 DJ/MP3-Controller for Traktor 2? Thx
	Rainer G. Haselier (admin) says: Done. Controller is now in the database.

Nikki Foxx wrote on June 9, 2012 at 23:55 how about mapping for Numark Mixtrack for OTSAV?

merge wrote on June 20, 2012 at 12:58 joost: loking for the tsi or map for traktor pro for the gemini CNTRL 7 as im a newbie and really need it , cant seem to get the hand of it myself ... if you could it would be great ! thanks merge

Deine Bande wrote on July 30, 2012 at 14:40 Tolle Vorlagen. Thank you for the PDFs. Greetz from Germany

Arnie wrote on August 4, 2012 at 11:24 Hi can i use this on mu vestax spin?? iv just bought pne and i use it with algoriddims djay but it does not hive me bargraphs.. so can u please make a template where i can use it with the vestax spin

andreas 33 wrote on August 12, 2012 at 18:21 mapping for vestax vfx1 (traktor pro2) . you help me

Laurent Verrue wrote on August 13, 2012 at 20:34 request: dj console 4-mx pleez

Will Parkin wrote on October 3, 2012 at 01:45 Hi Need a Traktor 2.5 mapping for an IMG Stage Line MC-500USB if anyone has one Thanks in Advance Will

Janko wrote on November 23, 2012 at 11:04 Hi Everybody, Maybe you can address me in the right direction. On a DENON MC6000 I am trying to make the EFX1 button deck-dependent but I understand that this always command on ch1, so maybe I can achieve this behavior via sw configuration. I want it to activate in traktor the "flux mode" for the deck currently selected. Is there any way to do that that you know? Else, can you mybe address me to a forum where I can post my question and get answer from real expert? thank you. Bye. Janko.

Dragonwhisper wrote on August 9, 2013 at 16:32 Hello @ all... I am looking for Template Laptop Keyboard. Can someone help me out? thank you

Jacko wrote on August 15, 2013 at 12:57 Any chance of a Xone:K2? Would love you for it :)

Ignacio wrote on November 20, 2013 at 20:28 Hola! Por casualidad tienen el mapeo de la un MIDI Skp Pro Audio SMX - 1000?

Tejas Parma wrote on January 1, 2014 at 15:39 Hii!! How to assign Jog Wheel Of Cdj 400 For Traktor Effect!!

Dorian wrote on January 9, 2014 at 03:40 Hey, anyone knows mapping for Faderfox LV2?? Thanks guys!

Fernando wrote on February 4, 2014 at 21:01 some time now I've been trying to map the X1 for Virtual Dj. I can not do anything ... I've tried everything ... can they help me??

levietra wrote on January 26, 2015 at 00:46 Why do I bother calling up people when I can just read this!

levistra wrote on January 26, 2015 at 03:21 The answer of an expert. Good to hear from you.

where to buy levitra in the us wrote on January 26, 2015 at 08:53 Great post with lots of important stuff.

home ins wrote on January 28, 2015 at 13:18 Hey, that's powerful. Thanks for the news.

levitra wrote on January 29, 2015 at 01:35 That really captures the spirit of it. Thanks for posting.

blossom nail spa wrote on September 22, 2021 at 13:27 thanks for posting

  Name

  E-Mail (will not be published)

  Website

Joost's Templates for Controller Mappings

The Templates

Tips for using the Mapping Templates

99 Comments

Leave a comment