PIONEER DDJ-SB 4 Deck mapping full working UPDATE V2.5

Hi my name is Max. i have created a mapping which allows you to use your DDj-SB as a 4 deck controller. Everything works on all 4 decks. You can also switch between the decks independently on both sides.
Hey Guys Update time! Bug fixes mapping is now split in 3 individual mappings because some people had problems with installation so please make sure you install ALL 3 MAPPINGS it won't work properly if you don't install all 3. Now lets come to the instructions how this works. Left deck: switch between Deck A and Deck C by pressing shift+play/pause button (your song won't stop by this) the shift button will stay illuminated if you are on Deck C right deck: switch between Deck B and Deck D by pressing shift+play/pause button. the shift button will stay illuminated if you are on Deck D. You can control all 4 decks independently from each other. FX Units: Now it gets a little tricky. I wanted to control the amount of the 3 effects separately. How this works is pretty simple. lets say we want to control the amount of effect 1 for that we press shift + the "effect 1 button" now it will light up, this means we are now controlling it with the knob (knob only works if you press shift and turn it then, this will be fixed) this works with every other effect in the same way. You can also use all effects at the same time. The Dry/wet adjust is controlled by turning the outer ring of the Jogwheel (not touching the metal plate on top of the Jogwheel). turn the left Jogwheel for D/W on FX unit 1 and the right Jogwheel for D/W on FX unit 2. Second layer for all 4 decks: i have added a second layer for all 4 decks, you can enable/disable it by pressing shift+keylock-button. this will turn the equalizer high adjust knobs into gain adjust for deck A and B and the mid adjust knobs into gain adjust for deck C and D. the filter knobs will control the key adjust of the selected channel. Does fully work on all 4 decks: Hotcues 1-8 Autoloops manual loop control (pad 3: decrease loop size pad 4: increase loop size) Hotloops Tempo sync ( sync button ) sync mode on ( shift+sync button ) equalizer vinyl Mode Flux mode Faderstart ( shift + linefader ) Seek position ( shift + jogwheel ) volume fader Fx units Keylock show browser only ( is toggled by pressing Panel ) Track load ( load tracks into deck C/D by pressing shift+ deck A/B track load button) CUP ( shift+cue) Monitor cue Filter fade Roll loops ( fx unit 3/4 have to be enabled in group mode effect/parameter/D/w will be selected automatically ) Please write a comment below. Let me know your wishes and suggestions for the following versions i will try to make them possible :) happy mixing! I have not added the sampler control yet, because i don't need it at the moment, but if you want me to add it write me a message and i will add it ASAP. It might look a little difficult but if you know the controls you can really use your DDJ-SB as a 4 deck Controller. So thats it for the moment if you have any questions, suggestions or if something doesn't work feel free to write me a message. there will be updates and fixes.
Pioneer - DDJ-SB
Pro, Scratch Pro, Pro S4 - Version 2.6.x	Downloads: 16600
4 decks, 2 FX units
Author: Martini44	Date: 3-19-2014
Download
Share

Rating

Current rating: 3,6 (3 votes)

Rating

You must be logged-in to rate a mapping.

17 Comments

cuties wrote on March 3, 2014 at 09:24 thanks man appreciate this so much.i register just to let you know this :)

cuties wrote on March 3, 2014 at 09:24 can you upload a video on youtube.com for using and importing this thanks
	Martini44 replies Sure man i will upload a tutorial video for this mapping as soon as i can :)) I will let you know when its up. I will also upload an update today which fixes some bugs with fx-unit so check it out Happy mixing Max

djjokebaba wrote on March 17, 2014 at 00:16 hi great mapping but my right deck b d not working can you help me with it regards
	Martini44 replies Hi djjoke, Are you sure you have imported the mapping through the big import button at the bottom of the preferences box? Because if you have imported it through the controller manager it cant work because traktor is only importing one mapping. My mappi

jcrue wrote on March 17, 2014 at 04:34 I just added this map and am working through it. I would like to disable the platter or making it as useless as possible while playing so that it doesn't screw up the playing track. Any thought?
	Martini44 replies Hi man, Please describe your problem a bit more because i mapped the platters so that they work like in serato So in vinyl mode you can use it for scratching and if vinyl mode is off you can use it for beatmatching. Please write me if this solved your

jcrue wrote on March 17, 2014 at 16:04 Sure Martini, ideally I want the platter to be an on/off proposition. I play a lot of house and I don't do any "performing" - just the house groove. I also have heavy hands and I find that when adjusting EQ or using the filters down the middle of the c
	Martini44 replies Iam playing a lot of house too :)) . So the only i can think off is that you have to go to the controller manager and delete all jog turn and jug touch on controls then the jogwheel will do nothing anymore. So try this and write me if it works for you th

djjokebaba wrote on March 18, 2014 at 18:04 hi martin im dj joke again all fucnktions are workin but just deck a and c the deck b and d not working please help regards

djjokebaba wrote on March 19, 2014 at 19:09 hi mike thaks again for the great mapping but its working diferent ben can you make deck a b c d because when i import tsi when right is workin left is not working when left is working right is not working can you make it a b c d so a and b

vladmikh wrote on April 11, 2014 at 18:04 Dude the deck files are empty when i export it from the zip file

DJLILLC wrote on April 23, 2014 at 06:41 How do you switch between the tree and the list? Also can you please add the samplers because they're very useful.

fluxdj wrote on May 27, 2014 at 13:36 could you upload a tutorial please on how this works, im having the same problems with the left deck working and the right one not

johnny2tokes wrote on October 9, 2014 at 02:42 Great download .. Works perfectly...thanks alot

l3androb wrote on October 24, 2014 at 23:55 hello , I'm from Brazil and I liked your mapping , it works is perfect . thank you for providing . I wonder if it is possible to change the control effect for the traditional knob instead of the jog wheel . Congratulations and thank you

SKD74 wrote on February 20, 2015 at 21:01 Dude, do you have the mapping for traktor v.2.0.3 perhaps? :-)

qum1991 wrote on February 26, 2015 at 21:07 Can you add samples please?

rodsag wrote on May 26, 2015 at 07:23 let me tell you that this mapping really work as we should be, the only doubt that i got its you write that 8 hotloops are activated, but i try to find the other 4 but not success, can you please give me a clue where can i find them, for the rest works pr

yadeyi004 wrote on June 3, 2015 at 04:16 Hey Max I tried importing your files individual then tried to use it but it only seemed to work when i uploaded it right before I used it. So if i uploaded the file for the deck a/c that would work but once i uploaded the file for the pad and deck b/d dec

ricardo_brasil79 wrote on January 7, 2016 at 15:11 There is a upgrade for this mapping to DDJ-SB2 to Traktor 2.9? Tks brothers. Hugs From Brazil.