Please note: This mapping is for TRAKTOR 2.10.1 and newer. The upload form did not allow me to select a higher version than 2.7. Please be aware of this and update Traktor accordingly.
---
Complex 2 Deck STEMS mapping for Behringer CDM LC-1 - V 1.0
/// Included in this package ///
- TSI mapping file for Traktor - This text - Illustration image - STEMS Track “Every Friday Is Smiley Friday“
You can purchase this and other tracks at Dubbed: https://www.dubseed.com/profile/1182
Tracks in traditional formats are available at Bandcamp: https://engineeer.bandcamp.com
Please support the artist! Thank you!
/// What it does ///
This mapping is designed to control volume, filter and effects of stem decks in Traktor V1.10.1 or newer using the Behringer CMD LC-1 controller. This mapping may also work with slightly older Traktor versions. But you may want to upgrade to the latest one, to be able to see the filter and FX knob settings on the screen, since there is no visual feedback for these on the controller.
/// Features In detail ///
Please refer to the illustration on how to use it!
1. Volume Control
Use the knobs to control the volume directly of the stems in deck A (upper row) and deck B (lower row). The LEDs of the knobs will indicate the volume setting of each stem.
“Reset buttons” are assigned to instantly reset the volume of the stems individually. These reset knobs will blink, if the stems are not playing at full volume. This allows you to spot the stems in low volume quickly and apply rapid correction, if needed.
2. Filter Control
Use the knobs in combination with the “filter modifier buttons” to control the filter of the stems in deck A (upper row) and deck B (lower row).
Use the “filter modifier buttons” in combination with the “reset buttons” to reset the filter settings individually.
Please note, that the filter settings won’t be displayed on the controller.
3. FX Send Control -
Use the knobs in combination with the “FX sends modifier buttons” to control the FX sends of the stems in deck A (upper row) and deck B (lower row).
Use the “FX sends modifier buttons” in combination with the “reset buttons” to reset the filter settings individually.
You can toggle the FX sends individually by pressing the eight small buttons below the knobs. The default setting is on.
Please note, that the status of the FX send settings won’t be displayed on the controller.
4. Visualization and Mute
Use “hold mute buttons” to silence stems individually. The “hold mute buttons” are constantly indicating the signal of the stems and won’t change when holding them down, however other mute buttons will indicate the muting visually.
Use the “toggle mute buttons” to turn stems on and off individually.
The very bottom button row allows you to toggle mute the stem channels of A and B at the same time. I’s a little hard to describe this accurately. so just try it out .. ;)
|